diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5cc2d9f..805713c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -337,6 +337,15 @@
 	Say Y here if you want to enable support for Orise Technology
 	otm8009a 480x800 dsi 2dl panel.
 
+config VIDEO_LCD_RAYDIUM_RM68200
+	bool "RM68200 DSI LCD panel support"
+	depends on DM_VIDEO
+	select VIDEO_MIPI_DSI
+	default n
+	help
+	Say Y here if you want to enable support for Raydium RM68200
+	720x1280 DSI video mode panel.
+
 config VIDEO_LCD_SSD2828
 	bool "SSD2828 bridge chip"
 	default n
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0dd8ea0..df7119d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -53,6 +53,7 @@
 obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
 obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
 obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
+obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
 obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
 obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
 obj-${CONFIG_VIDEO_MESON} += meson/
diff --git a/drivers/video/raydium-rm68200.c b/drivers/video/raydium-rm68200.c
new file mode 100644
index 0000000..91555e2
--- /dev/null
+++ b/drivers/video/raydium-rm68200.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *            Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics.
+ *
+ * This rm68200 panel driver is inspired from the Linux Kernel driver
+ * drivers/gpu/drm/panel/panel-raydium-rm68200.c.
+ */
+#include <common.h>
+#include <backlight.h>
+#include <dm.h>
+#include <mipi_dsi.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <power/regulator.h>
+
+/*** Manufacturer Command Set ***/
+#define MCS_CMD_MODE_SW	0xFE /* CMD Mode Switch */
+#define MCS_CMD1_UCS	0x00 /* User Command Set (UCS = CMD1) */
+#define MCS_CMD2_P0	0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
+#define MCS_CMD2_P1	0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
+#define MCS_CMD2_P2	0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
+#define MCS_CMD2_P3	0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
+
+/* CMD2 P0 commands (Display Options and Power) */
+#define MCS_STBCTR	0x12 /* TE1 Output Setting Zig-Zag Connection */
+#define MCS_SGOPCTR	0x16 /* Source Bias Current */
+#define MCS_SDCTR	0x1A /* Source Output Delay Time */
+#define MCS_INVCTR	0x1B /* Inversion Type */
+#define MCS_EXT_PWR_IC	0x24 /* External PWR IC Control */
+#define MCS_SETAVDD	0x27 /* PFM Control for AVDD Output */
+#define MCS_SETAVEE	0x29 /* PFM Control for AVEE Output */
+#define MCS_BT2CTR	0x2B /* DDVDL Charge Pump Control */
+#define MCS_BT3CTR	0x2F /* VGH Charge Pump Control */
+#define MCS_BT4CTR	0x34 /* VGL Charge Pump Control */
+#define MCS_VCMCTR	0x46 /* VCOM Output Level Control */
+#define MCS_SETVGN	0x52 /* VG M/S N Control */
+#define MCS_SETVGP	0x54 /* VG M/S P Control */
+#define MCS_SW_CTRL	0x5F /* Interface Control for PFM and MIPI */
+
+/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
+#define GOA_VSTV1		0x00
+#define GOA_VSTV2		0x07
+#define GOA_VCLK1		0x0E
+#define GOA_VCLK2		0x17
+#define GOA_VCLK_OPT1		0x20
+#define GOA_BICLK1		0x2A
+#define GOA_BICLK2		0x37
+#define GOA_BICLK3		0x44
+#define GOA_BICLK4		0x4F
+#define GOA_BICLK_OPT1		0x5B
+#define GOA_BICLK_OPT2		0x60
+#define MCS_GOA_GPO1		0x6D
+#define MCS_GOA_GPO2		0x71
+#define MCS_GOA_EQ		0x74
+#define MCS_GOA_CLK_GALLON	0x7C
+#define MCS_GOA_FS_SEL0		0x7E
+#define MCS_GOA_FS_SEL1		0x87
+#define MCS_GOA_FS_SEL2		0x91
+#define MCS_GOA_FS_SEL3		0x9B
+#define MCS_GOA_BS_SEL0		0xAC
+#define MCS_GOA_BS_SEL1		0xB5
+#define MCS_GOA_BS_SEL2		0xBF
+#define MCS_GOA_BS_SEL3		0xC9
+#define MCS_GOA_BS_SEL4		0xD3
+
+/* CMD2 P3 commands (Gamma) */
+#define MCS_GAMMA_VP		0x60 /* Gamma VP1~VP16 */
+#define MCS_GAMMA_VN		0x70 /* Gamma VN1~VN16 */
+
+struct rm68200_panel_priv {
+	struct udevice *reg;
+	struct udevice *backlight;
+	struct gpio_desc reset;
+	unsigned int lanes;
+	enum mipi_dsi_pixel_format format;
+	unsigned long mode_flags;
+};
+
+static const struct display_timing default_timing = {
+	.pixelclock.typ		= 54000000,
+	.hactive.typ		= 720,
+	.hfront_porch.typ	= 48,
+	.hback_porch.typ	= 48,
+	.hsync_len.typ		= 9,
+	.vactive.typ		= 1280,
+	.vfront_porch.typ	= 12,
+	.vback_porch.typ	= 12,
+	.vsync_len.typ		= 5,
+};
+
+static void rm68200_dcs_write_buf(struct udevice *dev, const void *data,
+				  size_t len)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int err;
+
+	err = mipi_dsi_dcs_write_buffer(device, data, len);
+	if (err < 0)
+		dev_err(dev, "MIPI DSI DCS write buffer failed: %d\n", err);
+}
+
+static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	int err;
+
+	err = mipi_dsi_dcs_write(device, cmd, &value, 1);
+	if (err < 0)
+		dev_err(dev, "MIPI DSI DCS write failed: %d\n", err);
+}
+
+#define dcs_write_seq(ctx, seq...)				\
+({								\
+	static const u8 d[] = { seq };				\
+								\
+	rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d));		\
+})
+
+/*
+ * This panel is not able to auto-increment all cmd addresses so for some of
+ * them, we need to send them one by one...
+ */
+#define dcs_write_cmd_seq(ctx, cmd, seq...)			\
+({								\
+	static const u8 d[] = { seq };				\
+	unsigned int i;						\
+								\
+	for (i = 0; i < ARRAY_SIZE(d) ; i++)			\
+		rm68200_dcs_write_cmd(ctx, cmd + i, d[i]);	\
+})
+
+static void rm68200_init_sequence(struct udevice *dev)
+{
+	/* Enter CMD2 with page 0 */
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0);
+	dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
+	dcs_write_seq(dev, MCS_BT2CTR, 0xE5);
+	dcs_write_seq(dev, MCS_SETAVDD, 0x0A);
+	dcs_write_seq(dev, MCS_SETAVEE, 0x0A);
+	dcs_write_seq(dev, MCS_SGOPCTR, 0x52);
+	dcs_write_seq(dev, MCS_BT3CTR, 0x53);
+	dcs_write_seq(dev, MCS_BT4CTR, 0x5A);
+	dcs_write_seq(dev, MCS_INVCTR, 0x00);
+	dcs_write_seq(dev, MCS_STBCTR, 0x0A);
+	dcs_write_seq(dev, MCS_SDCTR, 0x06);
+	dcs_write_seq(dev, MCS_VCMCTR, 0x56);
+	dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00);
+	dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00);
+	dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2);
+	dcs_write_seq(dev, GOA_VSTV1, 0x05);
+	dcs_write_seq(dev, 0x02, 0x0B);
+	dcs_write_seq(dev, 0x03, 0x0F);
+	dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50);
+	dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
+			  0x50);
+	dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
+			  0x00, 0x85, 0x08);
+	dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08);
+	dcs_write_seq(dev, 0x2D, 0x01);
+	dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
+		      0x00);
+	dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
+	dcs_write_seq(dev, 0x3D, 0x40);
+	dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
+	dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00);
+	dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
+	dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+		      0x00, 0x00);
+	dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
+			  0x16, 0x12, 0x08, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
+			  0x0A, 0x0E, 0x3F, 0x3F, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x05, 0x01, 0x3F, 0x3F, 0x0F);
+	dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
+			  0x3F);
+	dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
+	dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
+			  0x15, 0x11, 0x0F, 0x3F);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
+			  0x0D, 0x09, 0x3F, 0x3F, 0x07);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
+			  0x02, 0x06, 0x3F, 0x3F, 0x08);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
+			  0x3F, 0x3F, 0x0E, 0x10, 0x14);
+	dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
+	dcs_write_seq(dev, 0xDC, 0x02);
+	dcs_write_seq(dev, 0xDE, 0x12);
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
+	dcs_write_seq(dev, 0x01, 0x75);
+
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3);
+	dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+	dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+			  0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+			  0x12, 0x0C, 0x00);
+
+	/* Exit CMD2 */
+	dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
+}
+
+static int rm68200_panel_enable_backlight(struct udevice *dev)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = mipi_dsi_attach(device);
+	if (ret < 0)
+		return ret;
+
+	rm68200_init_sequence(dev);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(device);
+	if (ret)
+		return ret;
+
+	mdelay(125);
+
+	ret = mipi_dsi_dcs_set_display_on(device);
+	if (ret)
+		return ret;
+
+	mdelay(20);
+
+	ret = backlight_enable(priv->backlight);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rm68200_panel_get_display_timing(struct udevice *dev,
+					    struct display_timing *timings)
+{
+	struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+	struct mipi_dsi_device *device = plat->device;
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+
+	memcpy(timings, &default_timing, sizeof(*timings));
+
+	/* fill characteristics of DSI data link */
+	device->lanes = priv->lanes;
+	device->format = priv->format;
+	device->mode_flags = priv->mode_flags;
+
+	return 0;
+}
+
+static int rm68200_panel_ofdata_to_platdata(struct udevice *dev)
+{
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+		ret =  device_get_supply_regulator(dev, "power-supply",
+						   &priv->reg);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Warning: cannot get power supply\n");
+			return ret;
+		}
+	}
+
+	ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
+				   GPIOD_IS_OUT);
+	if (ret) {
+		dev_err(dev, "Warning: cannot get reset GPIO\n");
+		if (ret != -ENOENT)
+			return ret;
+	}
+
+	ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+					   "backlight", &priv->backlight);
+	if (ret) {
+		dev_err(dev, "Cannot get backlight: ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rm68200_panel_probe(struct udevice *dev)
+{
+	struct rm68200_panel_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
+		ret = regulator_set_enable(priv->reg, true);
+		if (ret)
+			return ret;
+	}
+
+	/* reset panel */
+	dm_gpio_set_value(&priv->reset, true);
+	mdelay(1);
+	dm_gpio_set_value(&priv->reset, false);
+	mdelay(10);
+
+	priv->lanes = 2;
+	priv->format = MIPI_DSI_FMT_RGB888;
+	priv->mode_flags = MIPI_DSI_MODE_VIDEO |
+			   MIPI_DSI_MODE_VIDEO_BURST |
+			   MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct panel_ops rm68200_panel_ops = {
+	.enable_backlight = rm68200_panel_enable_backlight,
+	.get_display_timing = rm68200_panel_get_display_timing,
+};
+
+static const struct udevice_id rm68200_panel_ids[] = {
+	{ .compatible = "raydium,rm68200" },
+	{ }
+};
+
+U_BOOT_DRIVER(rm68200_panel) = {
+	.name			  = "rm68200_panel",
+	.id			  = UCLASS_PANEL,
+	.of_match		  = rm68200_panel_ids,
+	.ops			  = &rm68200_panel_ops,
+	.ofdata_to_platdata	  = rm68200_panel_ofdata_to_platdata,
+	.probe			  = rm68200_panel_probe,
+	.platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
+	.priv_auto_alloc_size	= sizeof(struct rm68200_panel_priv),
+};